Larger sized, standard style bollard design with a white coloured light output from twelve LED's. It's the brightest solar bollard on the market at this time. This product is made in all aluminium with a clear polycarbonate, vandal resistant, lamp shade. Perfect for entrances, car parks, housing estates. footpaths and driveways. May be used in either a residential or commercial environment. Light output via a circular array of twelve high intensity white coloured LED's within the lens section. This bollard light will simply bolt or screw down onto any solid, flat, horizontal surface as 4 holes are pre-drilled into the circular base plate. In a dark location this bollard is capable of projecting light outwards and downwards for up to 4 meters all around (360 degrees). Overall light visibility of up to 1km. This bollard light produces around 630 Lux (approx. 63 footcandles) at source. Optionally, it is possible to fill the main body of this bollard with concrete to create a very solid lighting fitting. Available in a choice of two sizes (large or small). Colour of light output is white. Colour of product is black.
TECHNICAL SPECIFICATIONS
Illuminates for up to 12 hours or more.
3 Integral Ni-Cad rechargeable C-type batteries (1.2v 2800mAh), included and easily replaceable when necessary.
Twelve super bright, high output white coloured LED bulbs.
Each LED bulb provides 6 Lumens.
High quality 2.5 Watt solar panel.
Built-in photocell for automatic dusk-to-dawn operation.
All aluminium construction, no parts to rust.
Easily installed onto almost any horizontal solid surface.
Base plate of bollard has 4 pre-drilled holes for screw-down or bolt-down installation.
Bolts for installation are included (expanding anchor type).
The bolt pattern (diagonal centre to centre) is approximately 19cm.
Black powder coated finish.
Other colours available via special order only and for large quantity orders only (white, brown, rust or green).
Illumination pattern is 360 degrees with projection of light dow towards the ground, outwards.
630 Lux at source.
Approximately 6 Lux at ground 1 metre from bollard, 2 Lux at 2 metres and 1 Lux at 3 metres.
Spacing is at the discretion of the installer or as per requirements.
Spacing at 4 metres apart would typically achieve an approximate 2 Lux light distribution pattern along a pathway.
Spacing at 5 metres apart would typically achieve an approximate 1.5 Lux light distribution pattern along a pathway.
The small size bollard stands approximately 84cm high.
The large size bollard stands approximately 104cm high.
Main body (column section) is approximately 15cm diameter.
The clear lampshade section is approximately 18cm diameter and the lens is approximately 20cm high.
The top section of the bollard is approximately 23cm diameter.
The base section of the bollard is approximately 21.5cm diameter.
Light output is approx. 15-20 watts.
Spacing is at the owner/installer's discretion anywhere from 3 meters (10') to 12 meters (40') apart (subject to any specific requirements and/or location).
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
Time length of night time illumination is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc.
Shorter illumination time due to one or more of the above factors does not define the product as being defective or define the product as being advertised incorrectly.
We advertise and supply our solar lights to customers all over the world are therefore, naturally, we are unable to guarantee the nightly illumination time as it can vary and any time stated is quoted as 'up to' x amount hours.
Minor errors & omissions must be accepted.
Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice.
Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'.
Naturally, the illumination duration (light-up time) of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. This does not define the product as being 'defective' or 'not as described'.
CLICK HERE FOR PHOTOMETRIC DATA
|
Select Size
|
|
